|
JL Audio Slash 450.4 *UVP 849,00 Euro
Product Description:
Specifications:
Channels 1 and 2:
Rated Power (stereo mode): 150W RMS x 2 @ 1.5 ohm-4 ohm (11V-14.5V)
Rated Power (bridged mode): 300W RMS x 1 @ 3 ohm-8 ohm (11V-14.5V)
Channels 3 and 4:
Rated Power (stereo mode): 75W RMS x 2 @ 1.5 ohm-4 ohm (11V-14.5V)
Rated Power (bridged mode): 150W RMS x 1 @ 3 ohm-8 ohm (11V-14.5V)
THD at Rated Power: <0.03% @ 4 ohm
S/N Ratio*: >108.5 dB below rated power
Frequency Response: 5 Hz-30 KHz (+0, -1dB)
Damping Factor: >200 @ 4 ohm per ch./50 Hz
Input Range: switchable from 200mV-2V RMS to 800mV-8V RMSDimensions: 13.4"L x 9.25"W x 2.36"H
Features:
Differential-Balanced Input Topology: (2 pairs of inputs)
Channels 1 and 2 Crossover:
Fully-variable (50 Hz-5 KHz), selectable-slope LP or HP (12 or 24 dB per octave)
Channels 3 and 4 Crossover:
Fully-variable (50 Hz-5 KHz), selectable-slope LP or HP (12 or 24 dB per octave)
Preamp Output: 2-channel (Pass-through with selectable input sourcing)
Bass EQ: +6 dB (variable boost up to +15 dB with Remote Bass Option)
Infrasonic Filter (Channels 1&2 only):defeatable 24dB/octave at 30 Hz
Speaker output connections: accept up to 8ga. wire
+12V and Ground connections: accept up to 4ga. Wire
|
Amplifier Specifications: Amplifier Class: N/A
Number of Channels: 4
RMS Power (4 ohms): Ch. 1&2: 150W x 2; Ch 3&4: 75W x 2
RMS Power (2 ohms): Ch. 1&2: 150W x 2; Ch 3&4: 75W x 2
RMS Power (1 ohm): (at 1.5 ohms) Ch. 1&2: 150W x 2; Ch 3&4: 75W x 2
Bridged RMS Power: Ch. 1&2: 300W x 1; Ch 3&4: 150W x 1
Peak Power Output:
Minimum Impedance Unbridged: 1.5 ohms
Minimum Impedance Bridged: 1.5 ohms
THD at Rated RMS Power: 0.03%
Speaker Level Inputs: No
Amp Preamp Outputs: Yes - 1 pair
Built-in Crossover: Yes - HP / LP
High-Pass Crossover Frequency: 50 - 500 Hz
Low-Pass Crossover Frequency: 50 - 500 Hz
Subsonic Filter:
Signal-to-Noise Ratio: 108.5 dB
Channel Separation: N/A
Bass Boost: Bass EQ (on/off)
Bass/Gain Remote: N/A
Fan Cooled: N/A
Fuse Rating: 60A |
Ihr Warenkorb
